We'll Rip your worries to shreds.

R2v3 & RIOS CERTIFIED
NETWORK EQUIPMENT RECYCLING

 

Big Data Supply runs network equipment recycling for companies that need old switches, routers, firewalls, load balancers, and access points taken off their hands securely. We pull the gear, wipe or destroy any configuration and data sitting on it, pay you for whatever still has resale value, and send the rest through certified recycling so nothing ends up in a landfill or on a gray-market shelf. You get money back on the good stuff and a clean paper trail on all of it. We are an R2v3 and RIOS certified recycler based in Santa Ana, buying and processing IT in over 100 countries.

 

What network gear we take

The network equipment we recycle
We handle network hardware recycling across the full range of enterprise networking, not just the dead legacy boxes. On the current side that means Cisco Catalyst 9200, 9300, and 9500 switches, Nexus 9000, Meraki MS, Juniper EX4100 and EX4400, Arista 7050X and 7280R, Aruba CX 6300 and 6400, Fortinet FortiSwitch, Ruckus ICX, ExtremeSwitching 5420 and 5520, and Dell PowerSwitch N and S series. We also take the older families that have aged out, the Catalyst 2960 and 3750 era, HP ProCurve, Dell PowerConnect, and the rest, because a proper network equipment recycling program has to deal with the whole mix a real refresh leaves behind.

Alongside the switches we process routers, firewalls, wireless controllers and access points, optics and transceivers, patch panels, and the structured cabling that comes out with them. If you are decommissioning a rack or a whole room, the networking equipment recycling is usually part of a bigger pull that also includes servers, storage, and tape, and we take all of it in one job so you are not managing four vendors.

The process to recycle network equipment is simple

1

Send a list of assets

Share what you are retiring, switches, routers, firewalls, transceivers, whatever it is, and we send back a competitive quote.

2

Ship it

Once you agree on the numbers, send us the gear or we schedule a pickup for you. For bulk lots we handle the freight.

3

Get paid

After secure data erasure, payment goes out for the qualifying assets along with your certificate of data destruction.

READY, SET, RECYCLE. Fill out the form to get going.

Embedded Form - Sell IT

By submitting this form, I agree to receive email responses from Big Data Supply.


Questions? Contact us via Live Chat,
support@BigDataSupplyInc.com or
Toll Free (800) 905-7329.

Currently buying & supplying IT in over
100 countries and counting!

WHY COMPANIES CHOOSE BIG DATA SUPPLY

Trusted partner for network equipment recycling
Picking a partner for networking equipment recycling is partly a matter of trust, so here are a few places you can check us out that are not our own marketing. Big Data Supply is accredited by the Better Business Bureau and holds an A+ rating. Our eBay store carries a positive feedback rating of about 99.7 percent across roughly 8,200 items sold, which is a public track record of real transactions over years. We have exhibited at the ITAD Summit and are listed as an IT asset disposition partner in BitRaser's directory. Big Data Supply, Inc. was incorporated in California in 2012, and our primary facility is in Santa Ana, with additional locations in the Netherlands and Singapore that support pickups and shipments across the United States and worldwide. For your network equipment recycling that means a real crew for the removal and a wide network for whatever resale and recovery follow.

Certified network equipment recycling

Big Data Supply is R2v3 and RIOS certified, and for network equipment recycling that certification is the thing that actually matters. R2v3 is the recognized standard for responsible electronics recycling and reuse, and RIOS is an ANSI-accredited framework that folds environmental management, quality, and workplace safety into one certification. Together they mean we run audited systems and documented downstream handling rather than just promising to be careful.

Contact us
Frequently Asked Questions
What network equipment can you actually recycle?

Pretty much all of it. We take switches, routers, firewalls, load balancers, wireless controllers and access points, transceivers and optics, patch panels, and structured cabling, across current and legacy families from Cisco, Juniper, Arista, Aruba, Fortinet, Dell, HPE, and the rest. Current Catalyst 9000 and Nexus gear, older ProCurve and PowerConnect boxes, and everything in between all go through the same network equipment recycling intake, and anything that still has resale value gets quoted for buyback rather than scrapped.

Is it safe to recycle switches and firewalls that still hold our configs?

Yes, because we clear them before anything is recycled. Network gear holds configurations, credentials, routing tables, and VPN settings, so every job includes reviewing and revoking the credentials tied to the retired systems and sanitizing or destroying the data to a NIST 800-88 aligned method. For any drives or storage in the lot you get a certificate of destruction with serial numbers and a chain-of-custody record, which is the proof a compliance or legal team looks for.

Can you handle a bulk lot or a full network decommission?

Yes. A lot of our networking equipment recycling comes out of a bigger pull, a data center refresh or a full room shutdown, so we are set up for volume. We coordinate the freight, arrange pickup, and take the networking gear alongside the servers, storage, and tape in one job, so you deal with one partner and one set of documents rather than stitching several vendors together.

 

How fast can you turn around a quote?

Once you send a rough equipment list, a quote for your network equipment recycling usually comes back within one to two business days. If you need help building the list, we have a template that makes it quick. From an approved plan, we schedule pickup or freight, and payment for the qualifying assets goes out after the equipment is received, inventoried, and tested at our facility.

 

Do you pay for old network equipment, or just haul it away?

Both, depending on what the gear is. We assess the lot asset by asset, pay for the switches, routers, and optics that still have value, and route the rest to certified recycling. On network equipment recycling jobs with newer or in-demand hardware, the recovered buyback value can come out ahead of what the removal costs, so the retirement can end up net positive instead of a bill.

 

What does network equipment recycling cost?

There is no flat price, and anyone quoting one sight unseen is guessing. The number moves with how much gear is coming out, how many data-bearing devices need erasure or destruction, whether the job needs on-site labor and freight, and the disposal fees for material with no resale value. The part that surprises people is that the buyback on the valuable gear works against that cost, which is why we quote for free and lay out the removal cost and the expected buyback side by side.

 

How do I know the equipment is really recycled and not dumped?

Because we run certified network hardware recycling and can show the trail. Big Data Supply is R2v3 and RIOS certified, we validate the destination for every material stream, and we use certified downstream partners rather than unloading the gear on whoever will take it. You can verify our R2v3 status in the official R2 certified facility directory, and we will put the certificate numbers and scope in writing before you release anything.

 

cross linkedin facebook pinterest youtube rss twitter instagram facebook-blank rss-blank linkedin-blank pinterest youtube twitter instagram